How to load and unload your rods

To load your rod, grasp it securely and press the reel or handle end against the elastic shock cord until the rod's shaft or handle passes the hook and drops into the cradle.

Note: When securing a multi-piece rod, ensure the sections are held firmly together and that they are all captured by both hooks.



Once the rod is secured in the hooks, you may need to adjust the shock cord position to achieve the desired tension on the rod handle or shaft. To accommodate larger rod handles, move the elastic cord to a looser setting as shown in the image below. There are three available positions to customize the tension applied to your rod.




To increase tension when securing only the shaft of the rod, move the elastic tab to the first notch on the hooks, as shown in the image below.



To unload your rod, gently press it toward the center of the hooks using a counter-clockwise motion, then lift the rod upward and out.